Custom Bar Foot Rail Builder

Custom bar foot rail kits, built to your bar

Every Fût Mauricie bar foot rail is made to order in Trois-Rivières, Québec, from the same four-component system used on commercial bar rails: 1.5″ or 2″ OD stainless steel bar rail tubing cut to your exact length, TIG-welded support tees (brackets), flanged 90° elbows and end caps — every connection secured with polished acorn nuts, the kit's only fastener. Design it in the live 3D builder above — straight, L or U runs up to 240″ per side — and see your exact kit estimated instantly, from $250 to $2,650 CAD. Final price is confirmed on your free quote within 1 business day — no payment online, no commitment.

Floor mount or bar mount?

Floor mount is the classic: support tees drop to flanges bolted into the floor, rail centre at 5 9⁄16″ (141 mm). Bar mount floats the rail on the bar face — flanges bolt to the front panel, rail centre at 6 7⁄8″ (175 mm) with about 140 mm of clear floor beneath for easy cleaning and no floor anchors. Every bar-mount kit ships with an internal locking flange: the through-bolts clamp the bar panel between the front flange and a second flange inside the bar, so the rail holds solid even where the millwork is thin.

Bar foot rail height and support spacing

Finish the run your way: elbow returns that curve into the floor or bar face, or tee ends closed with end caps — laser-engraved logo caps are available on tee ends. Industry guides put a comfortable installed foot-rail height around 6–8″ off the floor. Support spacing matters more than most people expect: the rail ends are carried by the end returns, and the builder adds a support tee only when a span would exceed 6 ft (72″) — always placed to divide the run into perfectly equal spans, so a single support lands dead centre and the line stays symmetric. You see the exact tee count, elbow count and tube cut list before you request your quote.

Four finishes, two acorn nuts

The same finishes as our draft beer towers, from the same finishing line: brushed stainless, matte black, candy copper and gold — with polished chrome or gold acorn nuts on every flange and clamp ring. The whole kit assembles with those acorn-nut fittings alone: long sides ship as shorter sections that join inside a support tee, so there is no splice piece and no visible joint.

Common questions

How does ordering work? Design your rail in the builder, send it with your contact info, and a firm quote lands in your inbox within 1 business day — your exact design is saved with the request, nothing to re-explain.

What diameter should I choose? 2″ OD is the commercial standard and what most bars order; 1.5″ suits tighter residential bars.

How is it shipped? As a complete kit — pre-cut tubes, tees, elbows, end caps and hardware. Sides over 96″ are cut into shorter sections that meet inside a support tee; the fitting itself is the connection.

Can it match my draft tower? Yes — finishes are shared with our custom beer towers, so your rail, tower and drip tray can be one continuous design.

Do you build custom shapes? Runs beyond the online builder (wrap-arounds, custom angles, special finishes) are quoted by the same team — send the closest design through the builder above with a note, or email sales@futmauricie.com.