Running a bar or restaurant means more than just serving great food and drinks—it’s about delivering an exceptional customer experience. Your draft beer system plays a crucial role in this. When it functions smoothly, your customers enjoy fresh, perfectly poured pints that keep them coming back. But when issues arise—such as foamy, flat, or cloudy beer—you risk dissatisfied patrons and wasted product, both of which impact your bottom line.

Fortunately, the majority of draft beer issues are easy to diagnose and address. Most problems can be traced back to one of three factors: temperature, pressure, or cleanliness. Below is a guide to troubleshoot common draft beer problems, ensuring your beer system delivers optimal performance and your customers leave happy.


Foamy Beer

When your glass is filled with foam instead of beer, it’s wasteful and frustrating. Excess foam usually stems from one of these issues:

1. Temperature Too Warm

  • Beer kegs should be stored at a consistent temperature between 36°F and 40°F (2°C and 4°C).
  • For systems using a glycol chiller, ensure the glycol bath is set to this range.
  • Warm beer can release excess CO2, leading to over-carbonation and foam.

2. CO2 Pressure Too High

  • Check the regulator and adjust the CO2 pressure to the recommended level for the beer type (typically between 12-14 psi for most draft beers).
  • Excessive pressure pushes too much CO2 into the beer, creating foam.

3. Dirty or Damaged Faucet

  • Disassemble and clean the faucet every couple of weeks using hot water and a brush.
  • Inspect washers and replace them as needed to prevent leaks or foam-causing blockages.

4. Beer Hose Issues

  • Inspect the beer lines for kinks, obstructions, or improper length. Short or kinked hoses can cause inconsistent flow and excessive foam.

5. Improper Pouring Technique

  • Educate staff on proper pouring methods. Hold the glass at a 45-degree angle, and straighten it as it fills to achieve the perfect head.

Flat Beer

Flat beer lacks the effervescence and lively carbonation that enhances its flavor. This can be just as problematic as over-foamed beer and is often caused by these factors:

1. Temperature Too Cold

  • Keep kegs between 36°F and 40°F. Temperatures below this range can cause CO2 absorption, reducing carbonation levels.

2. CO2 Pressure Too Low

  • Ensure the regulator is set correctly. If the pressure is too low, CO2 won’t stay dissolved in the beer, resulting in flat pours.

3. Dirty Glassware

  • Grease, soap residue, or detergent film can kill beer’s carbonation. Always use “beer-clean” glasses, free of oils or residues.
  • Rinse glasses with cold water before pouring to maintain proper carbonation.

Cloudy Beer

Cloudy beer is not only unappealing but can also indicate quality or hygiene problems. Address these common causes:

1. Inconsistent Temperature

  • Fluctuating temperatures can cause the beer to form haze or sediment. Avoid exposing kegs to temperatures above 45°F (7°C).

2. Dirty Beer Lines

  • Clean beer lines thoroughly after every keg change, or at least once per month if not changing kegs frequently.
  • Use a cleaning solution specifically designed for beer lines to prevent residue buildup and bacteria growth.

3. Expired or Old Beer

  • Check the production or expiration date on your kegs.
  • Implement an inventory management system to rotate stock and use the oldest kegs first.

Maintenance Best Practices

  1. Regular Cleaning Schedule

    • Clean beer lines, faucets, and couplers regularly. Monthly cleaning is the minimum standard, though more frequent cleaning is ideal for high-volume establishments.
  2. Monitor Storage Conditions

    • Maintain consistent keg refrigeration temperatures and avoid temperature fluctuations during transportation or storage.
  3. Train Your Team

    • Educate your staff on proper pouring techniques, glass cleaning standards, and draft system troubleshooting.
  4. Check Equipment Frequently

    • Inspect components like faucets, hoses, couplers, and regulators for wear and tear. Replace parts proactively to avoid interruptions.

Why It Matters

A well-maintained draft beer system not only reduces waste but also enhances the customer experience, increasing satisfaction and repeat business. By addressing common problems like foamy, flat, or cloudy beer promptly, you can ensure your establishment remains a destination for quality drinks and great service.

For a deeper dive into maintaining your draft beer system, explore additional guides like “The Basics of Beer Line Cleaning” or “How to Pour the Perfect Pint.”

Make draft beer excellence part of your brand—because every pour matters!

Latest Stories

This section doesn’t currently include any content. Add content to this section using the sidebar.